string winder with dual string clipper, bridge pin remover, 10mm spanner and flat-blade screw drive
"Punch-a-Pick" pick cutter, max thickness 2mm
cleaner spray KONTAKT 60, 100ml spray can
cleaner spray KONTAKT 60, 200ml spray can
battery holder, horizontal type, clamp model (36x56mm), for 9V block battery
allen wrench, 1.5mm
allen wrench, 2.0mm
allen wrench, 2.5mm
allen wrench, 3.0mm
allen wrench, 4.0mm, 8.0mm long
allen wrench, 4.0mm, 30.0mm long
truss rod wrench, for 9/32" nut
truss rod wrench, for 5/16" Gibson nut
phillips head truss rod wrench, adjustment without taking off the neck
allen wrench set with holder and screws, 4 sizes, 1.5/2.0/2.5/3.0mm
allen wrench, 1.27mm, .050"
allen wrench, 5.0mm, 30.0mm long
guitar neck support, wood, short model
compact fret crown file, small (R:1mm) coarse cut and fine cut sides, blue
compact fret crown file, medium (R:2mm) coarse cut and fine cut sides, yellow
compact fret crown file, jumbo (R:3mm) coarse cut and fine cut, red
fret end file, extra fine (15cm length, 3mm width, 2mm thickness)
fret crowning file, for narrow frets (19,5cm length, 16mm width, 4mm thickness)
fret crowning file, for standard frets (19,5cm length, 16mm width, 4mm thickness)
fret crowning file, for wide frets (19,5cm length, 16mm width, 4mm thickness)
fret finishing file, for narrow frets (19,5cm length, 16mm width, 4mm thickness)
nut slotting files, with tapered ends, set of 3 pcs (19cm length, 14mm width, 2mm thickness)
thin nut file, (15cm length, 12mm width), .024
thin nut file, (15cm length, 12mm width), .032
thin nut file, (15cm length, 12mm width), .046
